Impact Crusher Fault Treatment
- the material is too big, can check the feed size;
- the uneven wear, indicating that the counterattack hammer need to be replaced;
- The rotor is unbalance and needs to be adjusted.
- If the foundation is not handled properly, the anchor bolts should be checked and strengthened.
- indicating that the bearing is short of oil, need to refuel in time; overrefueling will also make the bearing heat, when refueling must check the oil level;
- bearing damage, to replace the bearing in time;
- the upper cover is too tight, to adjust the bolt, loose and moderate appropriate.
the granularity is too big
- the hammer wear, the need to adjust the head or replacement of the hammer.
- the gap between the hammer head and the counterattack board is too large, and it is generally adjusted to 15-20mm.
- the granularity of feed will also affect the grain size.
- belt wear, need to replace the triangle belt;
- The problem of belt conveyer assembly needs to adjust the pulley on the same plane.
- the quality of the triangular belt itself is not passed.
Improve Productivity Of Impact Crusher
CI5X Impact Crusher
PF Impact Crusher
Jaw Crusher VS Impact Crusher
Impact Crusher Spare Parts
Impact Crusher Common Problems